show mpls counters rsvp multipath-name
Use this command to get traffic statistics over member trunks of multipath group.
Note: Qumran devices require hardware statistics profiles to be enabled explicitly for traffic statistics to be active. For tunnel statistics 'tunnel-lif' statistics profiles need to be enabled and system needs to be reloaded to take effect. Please see the hardware-profile statistics command in the OcNOS Configuration Guide for details.
Note: This statistic is not an explicit count of traffic over a multipath group. This statistic is collected over multipath members individually and any traffic individually carried by multipath members also counted under this output.
Command Syntax
show mpls counters rsvp multipath-name (NAME|)
Parameter
NAME
RSVP multipath group name
Command Mode
Exec mode and Privilege Exec mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#show mpls counters rsvp multipath-name test
Tunnel-id 5001 Extended Tunnel-ID 1.1.1.1 Egress 2.2.2.2
lsp-name : t1-Primary [Ingress]
lsp-ingress : 1.1.1.1 lsp-id : 2201
Rx pkts : n/a Rx bytes : n/a
Tx pkts : 3776248 Tx bytes : 5671925998
Tunnel-id 5002 Extended Tunnel-ID 1.1.1.1 Egress 2.2.2.2
lsp-name : t2-Primary [Ingress]
lsp-ingress : 1.1.1.1 lsp-id : 2202
Rx pkts : n/a Rx bytes : n/a
Tx pkts : 3776250 Tx bytes : 5671927500
Last modified date: 10/17/2023