rsvp message-ack
Use this command to enable message acknowledgment for all messages being sent to the neighbors that have been detected via the specific interface.
Use the no parameter with this command to disable message acknowledgment for all messages being sent to the neighbors that have been detected via the specified interface.
Command Syntax
rsvp message-ack
no rsvp message-ack
Parameters
None
Default
By default, Message Acknowledgment is disabled
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth0
(config-if)#rsvp message-ack
(config)#interface eth0
(config-if)#no rsvp message-ack
Last modified date: 10/17/2023