OcNOS-SP : Segment Routing Guide : Segment Routing Command Reference : EVPN SRv6 Commands : evpn srv6 id
evpn srv6 id
Use this command to set the VPN identifier to create an EVPN SRv6 tunnel.
Use evpn srv6 id for creating ELAN and use evpn srv6 xconnect with source and target identifier for ELINE/XConnect.
Command Syntax
evpn srv6 id <1-16777215> (| xconnect target-srv6-id <1-16777215>)
no evpn srv6 id <1-16777215>
Parameters
<1-16777215>
EVID
Command Mode
Config mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Example
(config)#evpn srv6 id 100 xconnect target-srv6-id 200
(coonfig)#no evpn srv6 id 100
 
Last modified date: 10/20/2023