OcNOS-SP : Segment Routing Guide : Segment Routing Command Reference : EVPN SRv6 Commands : evpn srv6 ip-global
evpn srv6 ip-global
Use this command to set the source IP address is used to establish BGP peering with neighbour SRv6 Nodes and to establish the EVPN SRv6 tunnels.
Use the no version of this command to delete the source IP address.
Command Syntax
evpn srv6 ip-global XX::XX
no evpn srv6 ip-global XX::XX
Parameters
X:X::X:X
Ipv6 address type
Command Mode
Config mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Example
(config)#evpn srv6 ip-global 2001::1
(config)#no evpn srv6 ip-global 2001::1
Last modified date: 10/20/2023