show running-config evpn srv6
Use this command to display the current running configuration of EVPN SRV6.
Command Syntax
show running-config evpn srv6
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Example
OcNOS#
OcNOS#show evpn srv6 xconnect
id tunnel
OcNOS#show evpn srv6 xconnect tunnel summary
Total number of entries: 1 [Installed: 0, Resolved: 1, Unresolved: 0]
OcNOS#show evpn srv6 xconnect tunnel sid
EVPN-SRV6 Network tunnel SID's
Evpn service type: ELINE
EVI-NAME: NA
PE IP: 2001::2
Status: Resolved
Xconnect information
Local Ethernet Tag Id: 70
Local UC-SID: 2981:40:a1:0:2::
Remote Ethernet Tag Id: 80
Remote UC-SID: 2981:40:a2:0:2::
Tunnel policy mapped: --
Total number of entries are 1
OcNOS#show evpn srv6 xconnect
EVPN Xconnect Info
========================
AC-AC: Local-Cross-connect
AC-NW: Cross-connect to Network
AC-UP: Access-port is up
AC-DN: Access-port is down
NW-UP: Network is up
NW-DN: Network is down
NW-SET: Network and AC both are up
Local Remote Connection-Details
================================ ============ ===================================================================================
VPN-ID EVI-Name MTU VPN-ID Source Destination PE-IP MTU Type NW-Status
================================ ============ ===================================================================================
70 ---- 1500 80 xe7.100 --- Single Homed Port --- 2001::2 1500 AC-NW NW-SET
Total number of entries are 1
Last modified date: 10/20/2023