show segment-routing srv6 services evpn
Use this command to display evpn srv6 service information and also mapped transport information.
Command Syntax
show segment-routing srv6 services (l3vpn( (vrf WORD) | ) | evpn ((id ID)|) |)
Parameters
evpn
Ethernet VPN
id
evpn instance identifier
ID
evpn vpws id
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Example
PE1#show segment-routing srv6 services evpn
Status codes: > - installed, * - selected, T - Uses service-mapped tunnel
Service Flags vrf local-evpn-id remote-evpn-id SID Nexthop SRv6-Policy-Name
ELINE > vrf1 70 80 2981:40:a2:0:2:: 2001::2 None
PE1#show segment-routing srv6 services evpn ?
id evpn instance identifier
| Output modifiers
> Output redirection
<cr>
PE1#show segment-routing srv6 services evpn id ?
ID evpn vpws id
PE1#show segment-routing srv6 services evpn id 70
Status codes: > - installed, * - selected, T - Uses service-mapped tunnel
Service Flags vrf local-evpn-id remote-evpn-id SID Nexthop SRv6-Policy-Name
ELINE * vrf1 70 80 2981:40:a2:0:2:: 2001::2 None
PE1#
Last modified date: 10/20/2023