OcNOS-SP : Segment Routing Guide : Segment Routing Command Reference : On-Demand Nexthop Commands : constraints
constraints
Use this command to set constraints for a dynamic candidate path.
Use the no form of this command to remove constraints from a dynamic candidate path.
Command Syntax
constraints
no constraints
Parameters
NA
Default
By default, constraints is not configured.
Command Mode
Candidate path mode
Applicability
This command was introduced in OcNOS version 6.2.0.
Example
OcNOS(config)#segment-routing
OcNOS(config-sr)#traffic-engineering
OcNOS(config-sr-te)#on-demand-nexthop 101
OcNOS(config-sr-odn)#candidate-path 11
OcNOS(config-sr-odn-cp)#constraints
Last modified date: 10/20/2023