min-tx
Use this command to configure Seamless BFD transmit interval, and the hello multiplier value for Seamless BFD session. Use the no form of the command to set the interval and multiplier to their default values.
Command Syntax
min-tx <3-999> multiplier <3-50>
no min-tx <3-999> multiplier <3-50>
Parameters
<3-999>
Desired Tx interval in ms
Multiplier
Set BFD Detection Multiplier
<3-50>
Multiplier value
Default
The default for the transmit interval is 10 milliseconds. The default hello multiplier value is 3.
Command Mode
MPLS_SBFD_SR mode.
Applicability
This command was introduced in OcNOS version 6.0.0.
Examples
#configure terminal
(config)#s-bfd sr policy 1
(config-sbfd)#min-tx 3 multiplier 5
Last modified date: 10/20/2023