segment-routing mpls
Use this command to enable MPLS-based segment routing for an ISIS or OSPF process.
Use the no form of this command to disable segment routing for an ISIS or OSPF process.
Command Syntax
segment-routing mpls
no segment-routing mpls
Parameters
None
Defaults
None
Command Mode
OSPF or ISIS router mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#router ospf 100
(config-router)#segment-routing mpls
#configure terminal
(config)#router isis 101
(config-router)#segment-routing mpls
Last modified date: 10/20/2023