srms preference
Use this command to set the preference used to select among conflicting advertisements to use in forwarding. A higher value is preferred over a lower one.
Use the no form of this command to set the preference to its default (128).
Command Syntax
srms preference <1-255>
no srms preference
Parameters
<1-255>
Preference value
Defaults
The default preference is 128.
Command Mode
Mapping server mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#segment-routing
(config-sr)#mapping-server
(config-sr-ms)#srms preference 200
(config-sr-ms)#
Last modified date: 10/20/2023