A.B.C.D (IP constraints)
Use this command to set IP constraints for a dynamic candidate path.
Use the no form of this command to remove an IP constraint from a dynamic candidate path.
Command Syntax
A.B.C.D (loose|strict|)
no A.B.C.D
Parameters
loose
Make this constraint loose
strict
Make this constraint strict
Default
By default, IP constraint is considered as loose.
Command Mode
Candidate path constraint mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#segment-routing
(config-sr)#traffic-engineering
(config-sr-te)#policy SR_POLICY_1
(config-sr-pol)#candidate-path 1
(config-sr-pol-cp)#dynamic-path isis
(config-sr-pol-cp)#constraints
(config-sr-pol-cp-cons)#2.2.2.2
(config-sr-pol-cp-cons)#20.1.1.2 strict
(config-sr-pol-cp-cons)#
Last modified date: 10/20/2023