binding-sid mpls label
Use this command to configure binding SID MPLS label value for a segment routing policy.
Use the no form of this command to remove a binding SID.
Command Syntax
binding-sid mpls label <16-15999>
no binding-sid mpls label
Parameters
<16-15999>
MPLS Label
Default
By default, binding SID is not configured.
Command Mode
RSVP trunk mode
Segment routing policy mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#segment-routing
(config-sr)#traffic-engineering
(config-sr-te)#policy SR_POLICY_1
(config-sr-pol)#binding-sid mpls label 15000
(config-sr-pol)#
#configure terminal
(config)#rsvp-trunk mytrunk ipv4
(config-trunk)#binding-sid mpls label 15000
Last modified date: 10/20/2023