color end-point
Use this command to configure key parameters for segment routing policy.
Use the no form of this command to remove a segment routing policy key.
Command Syntax
color <1-4294967295> end-point A.B.C.D
no color <1-4294967295> end-point A.B.C.D
Parameters
<1-4294967295>
Color value
A.B.C.D
IPv4 address type
Default
By default, no segment routing policy key is configured.
Command Mode
Segment routing policy mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#segment-routing
(config-sr)#traffic-engineering
(config-sr-te)#policy SR_POLICY_1
(config-sr-pol)#color 1 end-point 3.3.3.3
(config-sr-pol)#
Last modified date: 10/20/2023