constraints
Use this command to set constraints for a dynamic candidate path.
Use the no form of this command to remove constraints from a dynamic candidate path.
Note: Constraints are not supported for explicit candidate path.
Command Syntax
constraints
no constraints
Parameters
NA
Default
By default, constraints is not configured.
Command Mode
Candidate path mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#segment-routing
(config-sr)#traffic-engineering
(config-sr-te)#policy SR_POLICY_1
(config-sr-pol)#candidate-path 1
(config-sr-pol-cp)#dynamic-path isis
(config-sr-pol-cp)#constraints
(config-sr-pol-cp-cons)#
Last modified date: 10/20/2023