OcNOS-SP : Segment Routing Guide : Segment Routing Command Reference : Segment Routing v6 Commands : locator WORD
locator WORD
Use this command to configure locator name.
Use the no form of the command to remove the locator name.
Command Syntax
locators WORD
no locators WORD
Parameters
WORD
Locator name
Default
NA
Command Mode
Locators mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
(config-sr)#srv6
(config-srv6)#locators
(config-srv6-loc)#locator LOC_PE1
(config-srv6-loc-conf)#
 
(config-sr)#srv6
(config-srv6)#locators
(config-srv6-loc)#no locator LOC_PE1
 
 
Last modified date: 10/20/2023