segment-routing srv6 (IPv4)
Use this command to enter into segment routing SRv6 mode
Use the no form of this to remove segment routing SRv6.
Command Syntax
segment-routing srv6
Parameters
None
Command Mode
IPv4 address family for VRF mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
(config)#router bgp 100
(config-router)#address-family ipv4 vrf vrf1
(config-router-af)#segment-routing srv6
(config-router-vrfv4-srv6)#
(config)#
(config)#router bgp 100
(config-router)#address-family ipv4 vrf vrf1
(config-router-af)#no segment-routing srv6
Last modified date: 10/20/2023