segment-routing srv6 (ISIS)
Use this command to enter segment routing SRv6 mode.
Use the no form of this command to unconfigure segment routing SRv6.
Command Syntax
segment-routing srv6
no segment-routing srv6
Parameters
None
Default
NA
Command Mode
Address Family IPv6 mode under router ISIS mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
(config)#router isis 1
(config-router)#address-family ipv6
(config-router-af)#segment-routing srv6
(config-router-af-srv6)#
(config)#router isis 1
(config-router)#address-family ipv6
(config-router-af)#no segment-routing srv6
Last modified date: 10/20/2023