srv6-locator
Use this command to configure SRv6 locator word.
Use the no form this to command to remove SRv6 locator word.
Command Syntax
srv6-locator WORD
Parameters
WORD
Name of the Locator List
Command Mode
Segment routing srv6 mode
Applicability
This command was introduced before OcNOS version 5.1.
Example
(config)#router bgp 100
(config-router)#address-family vpnv4 unicast
(config-router-af)#segment-routing srv6
(config-router-vpnv4-srv6)#srv6-locator LOC_PE1
(config-router-vpnv4-srv6)#
Last modified date: 10/20/2023