srv6-locator WORD
Use this command to configure SRv6 locator name.
Use the no form to unconfigure the SRv6 locator name.
Command Syntax
srv6-locator WORD
no srv6-locator WORD
Parameters
WORD
Locator name
Default
NA
Command Mode
Segment routing SRv6 mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
(config)#router isis 1
(config-router)#address-family ipv6
(config-router-af)#segment-routing srv6
(config-router-af-srv6)#srv6-locator LOC_PE1
(config)#router isis 1
(config-router)#address-family ipv6
(config-router-af)#segment-routing srv6
(config-router-af-srv6)#no srv6-locator LOC_PE1
Last modified date: 10/20/2023