sid-alloc per-vrf
Use this command to configure the SID allocation per VRF.
Use the no form of the command to remove the SID allocation per VRF.
Command Syntax
sid-alloc per-vrf
Parameters
None
Command Mode
Segment routing SRv6 mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
(config)#router bgp 100
(config-router)#address-family ipv4 vrf vrf1
(config-router-af)#segment-routing srv6
(config-router-vrfv4-srv6)#
(config-router-vrfv4-srv6)#sid-alloc per-vrf
(config-router-vrfv4-srv6)#
(config)#router bgp 100
(config-router)#address-family ipv4 vrf vrf1
(config-router-af)#segment-routing srv6
(config-router-vrfv4-srv6)#
(config-router-vrfv4-srv6)#no sid-alloc per-vrf
Last modified date: 10/20/2023