traffic-engineering
Use this command to configure segment routing traffic engineering configuration.
Use the no form of this command to remove traffic engineering configuration.
Command Syntax
traffic-engineering
no traffic-engineering
Parameters
None
Default
By default, traffic-engineering is not configured.
Command Mode
Segment-routing mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
#configure terminal
(config)#segment-routing
(config-sr)#traffic-engineering
(config-sr-te)#
#configure terminal
(config)#segment-routing
(config-sr)#no traffic-engineering
Last modified date: 10/20/2023