OcNOS-SP : Segment Routing Guide : Segment Routing Command Reference : Segment Routing Service Mapping Commands : tunnel-policy
tunnel-policy
Use this command to create a tunnel policy.
Use the no parameter with this command to un-configure the tunnel policy. Tunnel policy can be un-configured only if no service is using.
Command Syntax
tunnel-policy NAME
no tunnel-policy NAME
Parameters
NAME
Name to be used for tunnel policy
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 5.1.
Example
#configure terminal
(config)#tunnel-policy policy1
 
#configure terminal
(config)#no tunnel-policy policy1
 
 
Last modified date: 10/20/2023