arp access-list resequence

OcNOS-SP : System Management Guide : System Management Command Reference : Access Control List Commands : arp access-list resequence

Use this command to modify the sequence numbers of an ARP access list.

Note: IP Infusion Inc. recommends to use a non-overlapping sequence space for a new sequence number set to avoid unexpected rule matches during transition.

Note: Re-sequencing an ACL attached to a management interface clears the ACL counters associated to it.

Command Syntax

resequence <1-268435453> INCREMENT

Parameters

<1-268435453>

Starting sequence number.

INCREMENT

Sequence number increment steps.

Command Mode

ARP access-list mode

Applicability

This command was introduced in OcNOS version 3.0.

Example

#configure terminal

(config)#arp access-list arp1

(config-arp-acl)#resequence 15 15

Last modified date: 10/19/2023