do
Use this command to run several exec mode or privileged exec mode commands from configure mode. The commands that can be run from configure mode using do are: show, clear, debug, ping, traceroute, write, and no debug.
Command Syntax
do LINE
Parameters
LINE
Command and its parameters.
Default
No default value is specified
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
#(config)#do show interface
Interface lo
Hardware is Loopback index 1 metric 1 mtu 16436 duplex-half arp ageing timeout 25
<UP,LOOPBACK,RUNNING>
VRF Binding: Not bound
Label switching is disabled
No Virtual Circuit configured
Administrative Group(s): None
DSTE Bandwidth Constraint Mode is MAM
inet 4.4.4.40/32 secondary
inet 127.0.0.1/8
inet6 ::1/128
Interface Gifindex: 3
Number of Data Links: 0
GMPLS Switching Capability Type:
Packet-Switch Capable-1 (PSC-1)
GMPLS Encoding Type: Packet
Minimum LSP Bandwidth 0
input packets 10026, bytes 730660, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 10026, bytes 730660, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
collisions 0
#
Last modified date: 10/19/2023