show running-config switch
Use this command to display the running system switch configuration.
Command Syntax
show running-config switch bridge
show running-config switch dot1x
show running-config switch gmrp
show running-config switch gvrp
show running-config switch lacp
show running-config switch lmi
show running-config switch mstp
show running-config switch radius-server
show running-config switch rpsvt+
show running-config switch rstp
show running-config switch ptp
show running-config switch stp
show running-config switch synce
show running-config switch vlan
Parameters
bridge
Display Bridge group information.
dot1x
Display 802.1x port-based authentication information.
gmrp
Display GARP Multicast Registration Protocol (GMRP) information.
gvrp
Display GARP VLAN Registration Protocol (GVRP) information.
lacp
Display Link Aggregation Control Protocol (LACP) information.
lmi
Display Ethernet Local Management Interface Protocol (LMI) information.
mstp
Display Multiple Spanning Tree Protocol (MSTP) information.
radius-server
Display RADIUS server information.
rpvst+
Display Rapid Per-VLAN Spanning Tree (rpvst+) information.
rstp
Display Rapid Spanning Tree Protocol (RSTP) information.
ptp
Display Precision time Protocol (PTP)
stp
Display Spanning Tree Protocol (STP) information.
synce
Display synce information.
vlan
Display values associated with a single VLAN.
Default
None
Command Mode
Privileged exec mode, configure mode, router-map mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
(config)#show running-config switch stp
!
bridge 6 ageing-time 45
bridge 6 priority 4096
bridge 6 max-age 7
Last modified date: 10/19/2023