watch static-mac-movement
Use this command to watch if any MAC movement is detected over static MAC entries for a time period. A notification will display if static MAC movement happens before the timer expires.
The counters can be validated with
show interface counters queue-stats for the L2 movement queue (
Tx pkts and
Dropped pkts columns).
Without enabling
watch static-mac-movement, the statistics are reflected in the
Rx EGR Port Unavail of
show interface counters queue-drop-stats.
For VXLAN, watch static-mac-movement applies to all the MAC entries learned from the remote peer (remote dynamic or static remote), as these learned MACs are installed as static MAC entries in the hardware.
Command Syntax
watch static-mac-movement (<1-300>|)
Parameters
<1-300>
Timer value in seconds.
Default
By default, the timer is 10 seconds
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#watch static-mac-movement
Last modified date: 10/19/2023