show forwarding profile limit
Use this command to display the forwarding profile table sizes.
Note: 1k is 1024 entries.
Command Syntax
show forwarding profile limit
Parameters
None
Default
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version SP 1.0.
Examples
#show forwarding profile limit
------------------------------------------------------------------------------
L3 (Ipv4/Ipv6) KAPS Forwarding Profile
------------------------------------------------------------------------------
Active (*) Configured (*) Profile-type IPv4-db-size IPv6-db-size
profile-one NA NA
* * profile-two - 200k
------------------------------------------------------------------------------
L3 (Ipv4/Ipv6) ELK TCAM Forwarding Profile
------------------------------------------------------------------------------
Active (*) Configured (*) Profile-type IPv4-db-size IPv6-db-size
* * profile-one ~1024k -
profile-two - ~1024k
profile-three ~2048k -
NOTE: for external-tcam profile-three, URPF should be disabled &
number of vrf's limited to 255
------------------------------------------------------------------------------
L2 forwarding table
------------------------------------------------------------------------------
Max Entries: 768k
NOTE: 1k is 1024 entries
#
Last modified date: 10/19/2023