show queue remapping
Use this command to display the traffic class-to-hardware-queue mapping in hardware.
Command Syntax
show queue remapping
Parameters
N/A
Default
N/A
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
This command is only available on Qumran platforms.
Examples
When service-queue profile1 is set:
#show queue remapping
Port queue remapping:
+------------+-----------------------+
| Queue/tc | hardware-queue |
+------------+-----------------------+
| 0 | 0 |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | 5 |
| 6 | 6 |
| 7 | 7 |
+------------+-----------------------+
Service queue remapping:
+------------+-----------------------+
| Queue/tc | hardware-queue |
+------------+-----------------------+
| 0 | 0 |
| 1 | 1 |
| 2 | 1 |
| 3 | 1 |
| 4 | 2 |
| 5 | 2 |
| 6 | 3 |
| 7 | 3 |
+------------+-----------------------+
When service-queue profile2 is set:
#show queue remapping
Port queue remapping:
+------------+-----------------------+
| Queue/tc | hardware-queue |
+------------+-----------------------+
| 0 | 0 |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | 5 |
| 6 | 6 |
| 7 | 7 |
+------------+-----------------------+
Service queue remapping:
+------------+-----------------------+
| Queue/tc | hardware-queue |
+------------+-----------------------+
| 0 | 0 |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | 5 |
| 6 | 6 |
| 7 | 7 |
+------------+-----------------------+
Last modified date: 10/19/2023