snmp restart
Use this command to restart SNMP for a given process.
Command Syntax
snmp restart (auth | bfd | bgp | isis | lacp| ldp | lldp | mrib | mstp | nsm | ospf | ospf6 | pim | rib| rip | rsvp |vrrp)
Parameters
auth
Authentication
bfd
Bidirectional Forwarding Detection (BFD)
bgp
Border Gateway Protocol (BGP)
isis
Intermediate System - Intermediate System (IS-IS)
lacp
Link Aggregation Control Protocol (LACP)
ldp
Label Distribution Protocol (LDP)
lldp
Link Layer Discovery Protocol (LLDP)
mrib
Multicast Routing Information Base (MRIB)
mstp
Multiple Spanning Tree Protocol (MSTP)
nsm
Network Service Module (NSM)
ospf
Open Shortest Path First (OSPFv2)
ospf6
Open Shortest Path First (OSPFv3)
pim
Protocol Independent Multicast (PIM)
rib
Routing Information Base (RIB)
rip
Routing Information Protocol (RIP)
rsvp
Resource Reservation Protocol (RSVP)
vrrp
Virtual Router Redundancy Protocol (VRRP)
Default
N/A
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)#snmp restart nsm
Last modified date: 10/19/2023