wavelength
Use this command to set the transceiver wavelength using the channel-number or the wavelength for interfaces having a supported transceiver.
Use the no form of this command to remove the wavelength configuration.
Command Syntax
wavelength ((channel-number <1-96>) | (update <1528773-1566723>))
Parameters
channel-number
Sets wavelength corresponding to the channel number
update
Sets wavelength value
Default
By default, the interface comes up with a random wavelength chosen by autotuning.
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 4.1.
Example
(config)#int xe7
(config-if)#wavelength channel-number 10
(config-if)#no wavelength
(config-if)#
(config-if)#wavelength update 1528773
(config-if)#no wavelength
(config-if)#
Last modified date: 10/19/2023