hardware-profile filter dhcp-snoop-ipv6

OcNOS-SP : System Management Guide : System Management Command Reference : DHCP Snooping Commands : hardware-profile filter dhcp-snoop-ipv6

Use this command to enable or disable the ingress dhcp-snoop-ipv6 TCAM group.

Command Syntax

hardware-profile filter dhcp-snoop-ipv6 (disable | enable)

Parameters

enable

Enable the ingress dhcp-snoop-ipv6 group

disable

Disable the ingress dhcp-snoop-ipv6 group

Default

None

Command Mode

Configure mode

Applicability

This command was introduced in OcNOS version 5.0.

Examples

configure terminal

(config)#hardware-profile filter dhcp-snoop-ipv6 enable

Last modified date: 10/19/2023