ip dhcp snooping arp-inspection bridge

OcNOS-SP : System Management Guide : System Management Command Reference : DHCP Snooping Commands : ip dhcp snooping arp-inspection bridge

Use this command to enable/disable arp-inspection on the bridge.

Note: You must enable dhcp snooping before enabling ARP inspection.

Command Syntax

ip dhcp snooping arp-inspection bridge <1-32>

no ip dhcp snooping arp-inspection bridge <1-32>

Parameter

<1-32>

Bridge number

Default

None

Command Mode

Configure mode

Applicability

This command was introduced in OcNOS version 5.0.

Example

#configure terminal

(config)#bridge 1 protocol mstp

(config)#ip dhcp snooping bridge 1

(config)#ip dhcp snooping arp-inspection bridge 1

Last modified date: 10/19/2023