ip dhcp snooping arp-inspection vlan
Use this command to enable ARP inspection on the VLAN in a bridge.
Use the no form of this command to disable ARP inspection on the VLAN in a bridge.
Command Syntax
ip dhcp snooping arp-inspection vlan VLAN_RANGE2 bridge <1-32>
no ip dhcp snooping arp-inspection vlan VLAN_RANGE2 bridge <1-32>
Parameters
VLAN_RANGE2
VLAN identifier <1-4094> or range such as 2-5,10 or 2-5,7-19
<1-32>
Bridge number
Default
None
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
configure terminal
(config)#bridge 1 protocol mstp
(config)#ip dhcp snooping bridge 1
(config)#ip dhcp snooping arp-inspection bridge 1
(config)#vlan 2 bridge 1 state enable
(config)#ip dhcp snooping vlan 2 bridge 1
(config)#ip dhcp snooping arp-inspection vlan 2 bridge 1
Last modified date: 10/19/2023