ip dhcp relay (configure mode)

OcNOS-SP : System Management Guide : System Management Command Reference : Dynamic Host Configuration Protocol Relay : ip dhcp relay (configure mode)

Use this command to enable the DHCP relay agent. The DHCP relay starts forwarding packets to the DHCP server address once configured.

Use the no form of this command to disable the DHCP relay agent.

Command Syntax

ip dhcp relay

no ip dhcp relay

Parameters

None

Default

By default, this feature is enabled.

Command Mode

Configure mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

#configure terminal

(config)#ip dhcp relay

#configure terminal

(config)#no ip dhcp relay

Last modified date: 10/19/2023