ip dhcp relay information option always-on
Use this command to enable the device to insert options 82 information in DHCP packets forwarded by the relay-agent and keep them while forwarding to client.
Use the no form of this command to disable the option-82 always-on information.
Command Syntax
ip dhcp relay information option always-on
no ip dhcp relay information option always-on
Parameters
None
Default
No default value is specified
Command Mode
Configure mode
VRF mode
Applicability
This command was introduced before OcNOS version 1.3 and was changed in OcNOS version 6.2.0.
Examples
#configure terminal
(config)#ip vrf vrf1
(config-vrf)#ip dhcp relay information option always-on
#configure terminal
(config)#ip dhcp relay information option always-on
#configure terminal
(config)#no ip dhcp relay information option always-on
Last modified date: 10/19/2023