ip dhcp relay information source-ip
Use this command to enable DHCP relay option 82 link selection.
Use the no form of this command to disable DHCP relay option 82 link selection.
Command Syntax
ip dhcp relay information source-ip A.B.C.D
no ip dhcp relay information source-ip
Parameters
A.B.C.D
IPv4 address
Default
No default value is specified.
Command Mode
Configure mode
VRF mode
Applicability
This command was introduced before OcNOS version 1.3.6.
Example
#configure terminal
(config)#ip vrf vrf1
(config-vrf)#ip dhcp relay information option source-ip 2.2.2.2
#configure terminal
(config)#ip dhcp relay information option source-ip 3.3.3.3
Last modified date: 10/19/2023