ipv6 dhcp relay pd-route-injection
Use this command to enable the Route Injection of the delegated prefixes in DHCP Relay.
Use the no form of this command to disable Route Injection.
Command Syntax
ipv6 dhcp relay pd-route-injection
no ipv6 dhcp relay pd-route-injection
Parameters
None
Default
By default this feature is disabled.
Command Mode
Configure mode
VRF mode
Applicability
This command was introduced in OcNOS version 4.2.
Examples
#configure terminal
(config)# ip vrf vrf1
(config-vrf)# ipv6 dhcp relay pd-route-injection
#configure terminal
(config)#ipv6 dhcp relay pd-route-injection
Last modified date: 10/19/2023