OcNOS-SP : System Management Guide : System Management Command Reference : Dynamic Host Configuration Protocol Relay : show ip dhcp relay address
show ip dhcp relay address
Use this command to display DHCP relay addresses.
Command Syntax
show ip dhcp relay address
Parameters
None
Command Mode
Executive mode
Applicability
This command was introduced before OcNOS version 1.3 and changed in OcNOS version 1.3.8.
Examples
#show ip dhcp relay address
VRF Name: vrf1
DHCP Servers configured: 9.9.9.9 8.8.8.8
VRF Name: default
DHCP Servers configured: 1.1.1.1 2.2.2.2
Last modified date: 10/19/2023