OcNOS-SP : System Management Guide : System Management Command Reference : Domain Name System Relay Commands : ip dns relay uplink
ip dns relay uplink
Use this command to configure an IPv4 interface as a DNS relay server-facing port.
Use the no form of this command to remove an IPv4 interface as a DNS relay server-facing port.
Command Syntax
ip dns relay uplink
no ip dns relay uplink
Parameters
None
Default
N/A
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 5.0.
Example
#configure terminal
(config)#int xe44
(config-if)#ip address 4.4.4.1/24
(config-if)#ip dns relay uplink
Last modified date: 10/19/2023