show running-config dns relay
Use this command to display DNS relay settings in the running configuration.
Command Syntax
show running-config dns relay
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 5.0.
Example
#show running-config dns relay
no ipv6 dns relay
!
ip vrf vrf1
ip dns relay address 1.1.1.2
ipv6 dns relay address fd01::2
!
ip vrf management
ip dns relay address 8.8.8.8
!
interface eth0
ip dns relay
!
interface xe1
ip dns relay uplink
!
interface xe32
ip dns relay
!
interface xe33
ip dns relay
!
interface xe44
ip dns relay
ipv6 dns relay
!
Last modified date: 10/19/2023