delay-measurement static
Use this command to advertise static the minimum and maximum delay values or average link delay variation or average link delay values between two directly connected IS-IS/OSPF neighbors.
Use the no parameter with this command to unset min-max-uni-link-delay, uni-delay-variation and uni-link-delay static values on the current interface.
Command Syntax
delay-measurement static (min-max-uni-link-delay <1-16777215> <1-16777215> | uni-delay-variation <0-16777215> | uni-link-delay <1-16777215>)
no delay-measurement static (min-max-uni-link-delay | uni-delay-variation | uni-link-delay)
Parameter
min-max-uni-link-delay
Min/Max Unidirectional Link Delay
<1-16777215>
Minimum Unidirectional Link Delay in microseconds
<1-16777215>
Maximum Unidirectional Link Delay in microseconds
uni-delay-variation
Unidirectional Delay Variation
<0-16777215>
Value in microseconds
uni-link-delay
Unidirectional Link Delay
<1-16777215>
Value in microseconds
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface eth1
(config-if)#delay-measurement uni-delay-variation static 12
(config-if)#no delay-measurement uni-delay-variation static
#configure terminal
(config)#interface eth1
(config-if)#delay-measurement static uni-link-delay 12
(config-if)#no delay-measurement static uni-link-delay
(config-if)#delay-measurement static min-max-uni-link-delay 1 3
config-if)#no delay-measurement static min-max-uni-link-delay
Last modified date: 10/19/2023