hardware-profile port-config
To use the four SFP28 ports UFIS9600-32X model, the new command is being introduced to breakout the first 100G port 0 and initialize the first four SFP28 ports as either 4X1G or 4X10G or 4X25G. By default, port 0 is being used as 100G and the four SFP28 ports are not available to OcNOS, as these ports are inactive in HW
Command Syntax
hardware-profile port-config (mode1 | mode2 |mode3|mode4 )
Parameter
mode1
32X100G (Default) ALL 100G ports will be present
mode2
4X1G + 31X100G 100G port 0 and initialize the first four SFP ports 4X1G
mode3
4X10G + 31X100G 100G port 0 and initialize the first four SFP+ ports 4X10G
mode4
4X25G + 31X100G 100G port 0 and initialize the first four SFP28 ports 4X25G
Default
No default value is specified
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 6.0.0
Examples
OcNOS(config)#hardware-profile port-config ?
mode1 32X100G (Default)
mode2 4X1G + 31X100G (ce0 breakout to 4X1G)
mode3 4X10G + 31X100G (ce0 breakout to 4X10G)
mode4 4X25G + 31X100G (ce0 breakout to 4X25G)
OcNOS(config)#hardware-profile port-config mode2
OcNOS(config)#comm
OcNOS(config)#
Last modified date: 10/19/2023