hardware-profile portmode

OcNOS-SP : System Management Guide : System Management Command Reference : Interface Commands : hardware-profile portmode

Use this command to set the global port mode.

Command Syntax

hardware-profile portmode (4X10g|40g)

Parameter

4X10g

Split all the 40G flex ports on the system

40g

Disable splitting on all flex ports and make all ports 40G

Default

No default value is specified

Command Mode

Configure mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

#configure terminal

(config)#hardware-profile portmode 40g

Last modified date: 10/19/2023