OcNOS-SP : System Management Guide : System Management Command Reference : Interface Commands : ip proxy-arp
ip proxy-arp
Use this command to enable the proxy ARP feature on an interface.
Use the no parameter to disable the proxy ARP feature on an interface.
Command Syntax
ip proxy-arp
no ip proxy-arp
Parameters
None
Default
By default, the ip proxy-arp is disabled
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth3
(config-if)#ip proxy-arp
 
Last modified date: 10/19/2023