ipv6 forwarding
Use this command to turn on IPv6 forwarding.
Use the no parameter with this command to turn off IPv6 forwarding.
Command Syntax
ipv6 forwarding
ipv6 forwarding vrf NAME
no ipv6 forwarding
no ipv6 forwarding vrf NAME
Parameters
NAME
Virtual Routing or Forwarding name
Default
No default value is specified
Command Mode
Command mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#ipv6 forwarding
Last modified date: 10/19/2023