show running-config ipv6
Use this command to show the running system status and configuration for IPv6.
Command Syntax
show running-config ipv6 (access-list|mroute|neighbor|prefix-list|route|)
Parameters
access-list
Access list.
mroute
Static IPv6 Multicast route.
neighbor
Static IPv6 neighbor entry.
prefix-list
IPv6 prefix-list.
route
Static IPv6 route.
Command Mode
Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
>enable
#show running-config ipv6 access-list
!
ipv6 access-list abc permit any
!
#show running-config ipv6 prefix-list
!
ipv6 prefix-list sde
seq 5 permit any
!
#show running-config ipv6 route
!
ipv6 route 3e11::/64 lo
ipv6 route 3e11::/64 eth2
ipv6 route fe80::/64 eth2
!
Last modified date: 10/19/2023