transceiver
Use this command to set the type of Small Form-factor Pluggable (SFP) transceiver inserted in the physical port.
Use the no form of this command to remove the setting.
Command Syntax
transceiver (1000base-sx|1000base-lx|1000base-ex|1000base-cx|10gbase-sr|10gbase-lr|10gbase-er|10gbase-cr|25gbase-sr|25gbase-lr|25gbase-er|25gbase-cr|40gbase-sr4|40gbase-lr4|40gbase-er4|40gbase-cr4|100gbase-sr4|100gbase-lr4|100gbase-er4|100gbase-cr4)
no transceiver
Parameters
1000base-cx
SFP 1000base-cx
1000base-ex
SFP 1000base-ex
1000base-lx
SFP 1000base-lx
1000base-sx
SFP 1000base-sx
100gbase-cr4
QSFP28 100gbase-cr4
100gbase-er4
QSFP28 100gbase-er4
100gbase-lr4
QSFP28 100gbase-lr4
100gbase-sr4
QSFP28 100gbase-sr4
10gbase-cr
SFP+ 10gbase-cr
10gbase-er
SFP+ 10gbase-er
10gbase-lr
SFP+ 10gbase-lr
10gbase-sr
SFP+ 10gbase-sr
25gbase-cr
SFP+ 25gbase-cr
25gbase-er
s
SFP+ 25gbase-er
25gbase-lr
SFP+ 25gbase-lr
25gbase-sr
SFP+ 25gbase-sr
40gbase-cr4
QSFP 40gbase-cr4
40gbase-er4
QSFP 40gbase-er4
40gbase-lr4
QSFP 40gbase-lr4
40gbase-sr4
QSFP 40gbase-sr4
Default
No default value is specified
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
(config)#interface ce1/1
(config-if)#transceiver 40gbase-lr4
Last modified date: 10/19/2023