OcNOS-SP : System Management Guide : System Management Command Reference : Interface Commands : show interface poe-status
show interface poe-status
Use this command to display PoE enabled status for single interface or all the interface.
Note: Command is applicable only for boards which supports PoE interfaces.
Command Syntax
show interface (IFNAME|) poe-status
Parameters
IFNAME
Interface name. If not specified, this command displays PoE enabled status for all the PoE applicable ports.
Default
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 5.1.
Example
#show interface poe-status
-----------------------------
Interface State
-----------------------------
ge1 Enabled
ge2 Enabled
ge3 Disabled
ge4 Disabled
xe27 Disabled
xe28 Disabled
#
#show interface ge1 poe-status
-----------------------------
Interface State
-----------------------------
ge1 Enabled
#
Last modified date: 10/19/2023