feature ntp
Use this command to enable to NTP feature.
Use the no form of this command to disable NTP feature and delete all the NTP related configurations.
Command Syntax
feature ntp (vrf management|)
no feature ntp (vrf management|)
Parameters
management
Virtual Routing and Forwarding name
Default
By default, feature ntp is enabled.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#feature ntp vrf management
(config)#no feature ntp vrf management
Last modified date: 10/19/2023