ntp master stratum
Use this command to set stratum value for NTP server.
Use the no command to remove stratum value.
The NTP Stratum model is a representation of the hierarchy of time servers in an NTP network, where the Stratum level (0-15) indicates the device's distance to the reference clock.
Command Syntax
ntp master stratum <1-15> (vrf management|)
no ntp master stratum (vrf management|)
Parameters
<1-15>
Stratum value for NTP server
vrf
Virtual Router and Forwarding
management
Virtual Routing and Forwarding name
Default
By default, NTP startum value is 16.
Command Mode
Configure mode
Applicability
This command is introduced in OcNOS version 4.1.
Example
#configure terminal
(config)#ntp master stratum 2 vrf management
Last modified date: 10/19/2023